NiMH Battery News & Industry Insights

Model-Based Optimal Charging: Minimising Time and Degradation in NiMH at Once

2026-09-12

Optimal-control charging for NiMH: framing charge as a constrained optimisation of time versus degradation, multi-stage constant-current as the practical optimum, electrochemical constraints, and how optimal profiles compare with conventional fast charge.

More Details

Ageing-Aware Adaptive Charging: Letting the Charger Learn the Cell It Is Holding

2026-09-12

Adaptive NiMH charging that updates current and termination as cells age: tracking resistance and peak drift, adjusting current to retained capacity, closed-loop thermal control, and the evidence that adaptation extends usable pack life.

More Details

Charger and Battery Safety Standards: IEC 62133, IEC 60335 and the Certification of NiMH Charging Systems

2026-09-12

Safety standards governing NiMH cells, batteries and chargers: IEC 62133-1/62133-2 battery safety, IEC 60335 household-appliance charger safety, transport and EMC, and how charge profiles are validated against abusive and fault tests.

More Details

Charger Efficiency, Standby Power and Energy-Efficiency Compliance for NiMH Chargers

2026-09-12

Energy performance of NiMH chargers: conversion efficiency by topology, no-load and standby consumption, maintenance-energy overhead, external-power-supply efficiency regulations, and designing chargers that minimize wall energy across the charge cycle.

More Details

Current Sensing and NTC Thermistor Design for Accurate NiMH Charge Control

2026-09-12

The measurement chain behind NiMH charge control: sense-resistor and current-amplifier design, Kelvin connection, NTC selection and placement, signal conditioning and fault detection, and calibration for reliable -dV and dT/dt.

More Details

Inside a NiMH Charge-Management IC: Architecture of the bq2002-Class Fast-Charge Controller

2026-09-12

Block-by-block architecture of a NiMH fast-charge IC using the TI bq2002 family: voltage and temperature sensing, termination logic, programmable timers, top-off and pulse-trickle outputs, status and the external components that configure it.

More Details

Power Topologies for NiMH Chargers: Linear Versus Switching, Buck Converters and Current-Mode Control

2026-09-12

Choosing the NiMH charger power stage: linear versus switching regulators, buck and synchronous-buck topology, current-mode control for constant-current output, efficiency, heat and EMI trade-offs across consumer to pack chargers.

More Details

High-Rate NiMH Packs for Cordless Power Tools: Charging for Burst Power and Fast Turnaround

2026-09-12

Charging high-rate NiMH power-tool packs: high discharge/charge capability, sub-hour fast charge demands, thermal and pressure limits of stick packs, charger-pack communication and the NiMH versus Li-ion tool-pack transition.

More Details

Language